Hello
Leaping into my Solo last week I noticed that cracks have re-opened in the bottom join between the sidetanks and the floor.
Any recommendations for dealing with this?
I gather I'm not the first person to sufer from this esp. in older boats and I'm not sure of what exactly is behind the join....might have to wait until later on in the year when its dry..
best rgds
simon
Solo 133
Solo Sidetank issues
Re: Solo Sidetank issues
Depends on how pretty you want it to be.
Easy way is to just clean and dry the joint and re-glue with a nice epoxy fillet, maybe with some tape also if you want it to be mega-strong.
Not hard to do. Did my Firefly years ago and still no problems with the joint.
BW
eib
Easy way is to just clean and dry the joint and re-glue with a nice epoxy fillet, maybe with some tape also if you want it to be mega-strong.
Not hard to do. Did my Firefly years ago and still no problems with the joint.
BW
eib
Ed Bremner
CVRDA
Jollyboat J3
Firefly F2942
IC GBR314 ex S51 - 1970 Slurp
MR 638 - Please come and take it away
Phelps Scull
Bathurst Whiff - looking for someone to love it
CVRDA
Jollyboat J3
Firefly F2942
IC GBR314 ex S51 - 1970 Slurp
MR 638 - Please come and take it away
Phelps Scull
Bathurst Whiff - looking for someone to love it
Re: Solo Sidetank issues
Just in the process of doing the same with my Hornet. 60 year old glue packing up.
Hornet 191 Shoestring,
Hornet 595 Demon awaiting restoration
Hornet 610 Final Fling
Hornet 353
Hornet 595 Demon awaiting restoration
Hornet 610 Final Fling
Hornet 353
-
- Posts: 2
- Joined: Wed Jun 15, 2016 10:31 am
Re: Solo Sidetank issues
Ok many thanks - as I suspected!
best rgds
simonf
best rgds
simonf
Re: Solo Sidetank issues
Good morning - I had the same problem on my old Albacore, put a fix in place this winter and it seems to be doing the job grandly so far.
3inch fibreglass tape and epoxy all the way around the join between sole and box. The result is a very strong bond, waterproofed with the epoxy .
Easier to carry out the job with two pairs of hands, one to lay in place the tape as you go, followed by the second epoxying the stuff in place.
3inch fibreglass tape and epoxy all the way around the join between sole and box. The result is a very strong bond, waterproofed with the epoxy .
Easier to carry out the job with two pairs of hands, one to lay in place the tape as you go, followed by the second epoxying the stuff in place.
1965 Albacore No 1775 "XQSME"
previous = 1962 Wayfarer W170 "Peter Pan"
Flying Fifteen
Twister
previous = 1962 Wayfarer W170 "Peter Pan"
Flying Fifteen
Twister